고정 헤더 영역
상세 컨텐츠
본문
AUGSEPOCTNOVDECJANABCDEFFEBMARAPRMAYJUNJULGHIJKL.Key to Month of Model YearFigure 1 – HIN Formats Before August 1, 1984The boat manufacturer must display two identical hull identification numbers, no less than one-fourth of an inch high, on each boat hull. The primary HIN must be permanently affixed (so that it can be seen from outside the boat) to the starboard side of the transom within two inches of the top of the transom, gunwale, or hull/deck joint, whichever is lowest. On boats without transoms or on boats on which it would be impractical to the transom, the HIN must be affixed to the starboard outboard side of the hull, aft within one foot of the stern and within two inches of the top of hull side, gunwale, or hull/deck joint, whichever is lowest. The starboard outboard side of the hull aft is the preferred HIN location for many manufacturers.
Boat Registration Number Lookup
On catamarans and pontoon boats the HIN must be affixed on the aft crossbeam within one foot of the starboard hull attachment. JANFEBMARAPRMAYJUNABCDEFJULAUGSEPOCTNOVDECGHIJKLFigure 2 – HIN Format After August 1, 1984Boats manufactured or imported on or after August 1, 1984, also have a duplicate secondary HIN affixed somewhere on an unexposed location inside the boat or beneath a fitting or item of hardware. The purpose is to help authorities identify your boat if a thief or vandals remove or damage the primary HIN on the transom. It is illegal for anyone (manufacturer, dealer, distributor, or owner) to alter or remove a HIN without the express written authorization of the Commandant, U.S. Coast Guard.The regulations prescribe the format of the HIN. The first three characters are a MIC (Manufacturer Identification Code) assigned by the Coast Guard to the manufacturer or the person importing the boat; characters four through eight are a serial number assigned by the manufacturer; the last four characters indicate the month and year the boat was built, and the model year.
Tracker Boat Serial Number Lookup 1233372
Prior to August 1, 1984, the manufacturer had the option of expressing this in the form of a model year designation.The Coast Guard maintains a searchable database of MICs if you want to check yours out.Individuals building boats for their own use and not for the purposes of sale are what are referred to as “backyard boat builders.” They must obtain a 12 character HIN from their State boating agency. The Manufacturer Identification Code at the beginning of the HIN for a “home built” boat is an abbreviation for the State followed by a “Z” which indicates that it is a State identification.
